5v Addressable SD Card controlled LED Rigid Bar Magic Color Weatherproof
Features:
- This LED rigid bar is full addressable so it can be cut every LED.
- The LED is the most popular chip WS2812B, fully addressable ws2811 full color led rigid bar for buildingWS2811 chip build inside SMD 5050 RGB.
- Aluminum housing with epoxy waterproof IP65, both side of bar output the waterproof 3Pin connector.
- Every 1 meter bar include 2pcs metal clip(for installation use), 1pcs T type connector(every 5m).
- PCB Color: White and Black are available, PCB Width: 15mm.
- Control: SD controller(t-1000s,t-4000c,t-8000A) ,DMX Decoder, Artnet,etc.
- Waterproof/weatheproof, energy-saving, low-cost of maintenance, and long life span.
- Length: 0.5M, 1M, 1.5M,2M or customized
- It is very cool for LED signs, whole building decoration,stage.
- cover color: clear cover and milky cover are available
Parameters:
| Product Name |
ws2811 programmable pixel full color led rigid bar |
| Model Number |
SJ-10060-2811 |
| Voltage |
DC5V input |
| Power |
14.4W/M |
| LED Qty |
60 leds/m |
| IC Chip |
ws2811 built-in 5050 RGB LED chip |
| Size/mm |
1000*20 |
| PCB Width |
15mm |
| PCB Color |
Black/White |
| Connector |
3Pin waterproof connectors |
| IP Rate |
IP20,IP65 epoxy waterproof, milky/ clear cover |
| Warranty |
2 years |
Pictures:
Instructions:
1. Compatible 5V power supply
An LED 5Volt Driver is required to power the LED rigid bars. They are available to buy with the LED bar on this page or can be purchased separately in our LED driver department where we also sell waterproof drivers. Each metre of LED rigid bar requires 14.4 watts of power so choose a driver powerful enough to supply the total watts required.
2. Connection:
1) Signal wire: DC+,GND,DAT,
2) DC+ and GND connect to power supply;DAT connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX controller and work with Madrix software
4) Support online control, T-200k can be online /off line controlled
3. Installation:
Each light bar is supplied with 2 metal clips - screw the clips to a surface then push the light bar into the clips to secure.
Pictures:
Note:
1. Indoor and oudoor using
2. Turn off the power before installment, don't touch the surface of the lights when light on
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light.
6. Installed position must be no shock, no fire hidden danger
7. Do not touch or/and knock the product body during working
Discription:
This led rigid strips will give you an atmosphere of freshness, if used in
illuminating signs, interior lighting, cove lighting, or exhibit lighting, large
cabinet lighting, project lighting, and any sort of close application task
lighting. This led rigid light stripe features Brightness, safety, environmentally-friendliness, long-lasting but also energy saving.
Product Tags:
|
|
5v Addressable SD Card controlled LED Rigid Bar Magic Color Weatherproof Images
|
